6
Basic Setup
Your new Martin bow takes little setup to get started shooting. Please read and
familiarize yourself with these starting procedures before shooting. Many of these
procedures may have been completed by your authorized Martin dealer. After
completingthesesimplesteps,you will be more accurate and will have greatersuccess
fromthestart.Acarefulandthoroughinitialsetupwillmakethetuningprocessmucheasier.
•CableGuard
T h e c a b l e g u a r d r o d s h o u l d b e r o t a t e d t o
provide adequate fletching clearance. Caution should
be taken against over-rotating the rod as excessive
clearance can cause unnecessary pressures on the limb tips
andaxlebearings.
Followthesesteps:
1.Visuallyalignshootingstringdownthecenterofthegrip.
2.Adjust arrowrest left or right soarrow iscentered with the
shootingstring.
3.Adjustcableguardsothatcablesareoff-setno more than
neededforetchingclearance.
Onceoptimumangleisachieved,fullytightenthescrew,but
donotovertighten.
•SettingArrowRestPosition
After your arrow rest is installed, you
willneedtosetitatagoodstartingpoint
to begin tuning. The easiest way to do
this is to visually align the bowstring
in the center of the grip section. If you
are shooting your bow with a release
aid, your
rest will need to be centered
with the bow string. During tuning, your
arrowrestmayneedtobemovedinorout
fromitscenteredlocation.Thisisnormal
becausedifferentshootersapplydifferent
pressurestothebow.Fingershooterswill
needtopositiontherestsothatthepoint
isabout1/8”outsidethestring.Thisisto
compensateforthehorizontalbendingof
thearrowuponrelease.Anarrowrestthat
provides some side support, such as a
cushionbuttonforthearrow,isbestfor
ngershooters.
2
1
3
FingerSetting
ReleaseSetting
Comments to this Manuals